|
 Industrial Fiber Optic Short Link |
|
| Avago Technologies’ Industrial Fiber Optic (FO) Short Link is a cost-effective semiconductor product that provides 12 kV transient galvanic isolation on a single PCB. Based on 650 nm fiber optic technology, the FO Short Link is suitable for applications such as inverters/drives, power electronics, or medical equipment. The HFBR-3810Z and HFBR-3810MSZ devices offer creepage and clearance distances, with a minimum of 18.1 mm. |
|
| |
|
| Gate Drive Optocouplers |
|
| The ACPL-K342/ACPL-H342 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. |
|
| |
|
| Isolated Sigma-Delta Modulator |
 |
The ACPL-C797 is an upgrade for the HCPL-7860/786J series. Upgraded features include extended operating temperature range of -40 to +1050C, 3.3V/5V compatible digital interface, better offset, improved linearity, and tightened clock frequency. This device is offered in Stretched SO-8 package. Compare to traditional DIP-8 package, this package allows PCB land saving of 30%. |
| |
|
| 1MBd Digital CMOS Optocoupler |
 |
| The ACPL-054L (dual-channel) is a 1 MBd transistor output digital optocoupler that is designed to address the low power need at low speed communication. The optocoupler has low forward current (3mA) and high CTR performance (min 80%) allowing direct current drive by most microprocessors and avoids the use of buffers to drive the LED. |
|
|
| |
|
| 12-bits Magnetic Encoder |
 |
| The AEAT-60xx series is a high performance, low cost, optical absolute magnetic encoder module, designed to detect absolute angular position for precise motor feedback. |
|
| |
|
| Ultra Low Noise, High Linearity Low Noise Amplifier |
 |
Avago Technologies' MGA-634P8 is the latest addition to its family of ultra low noise, high gain, high linearity Gallium Arsenide (GaAs) Active Bias Low Noise Amplifiers (LNA), which is equipped with Industrial Best In Class NF (0.48dB at 1900MHz) performance. |
| |
|
| 5mm Round Red LED |
 |
These Precision Optical Performance AlInGaP LEDs provide superior light output for excellent readability in sunlight and are extremely reliable. AlInGaP LED technology provides extremely stable light output over long period of time. Precision optical performance lamps utilize the aluminum indium gallium phosphide (AlInGaP ) technology. |
| |
|
|
 |
|
|
| CFP MSA Releases Updated Hardware and Firmware Documents Defining 40Gbps and 100Gbps Optical Transceivers |
Avago Technologies is a new member of CFP MSA.
|
| Avago Technologies HFBR-3810Z Fiber Optic Short Link Transmitter/Receiver Features 12 kV Isolation |
Learn about the new HFBR-3810Z/HFBR-3810MSZ Industrial Fiber Optic Short Link.
|
| Avago Technologies Stresses IGBT Protection in New Isolated Gate Drivers |
Learn more about the new ACPL-K342/ACPL-H342 Gate Drive Optocouplers.
|
| Avago Technologies MGA-634P8 LNA Offers Ultra Low Noise Figure and Increases Linearity Performance for Cellular Infrastructure Applications |
Learn more about the new MGA-634P8 Low Noise Amplifiers.
|
| Avago Technologies New ACPL-C797 Sigma-Delta ADC Increase Accuracy and Isolation |
Learn more about the new ACPL-C797 Isolated Sigma-Delta Modulator
|
| Avago LED Lamps Support European Vertical Message Sign Regulation EN 12966-1 |
Read about Avago's Red and Amber LED Lamps with 15°/30° Viewing Angle.
| |
|
| BROCHURE: Fiber Optic and Isolation Solutions for Renewable Energy Applications |
|
Avago Technologies offers a wide range of fiber optic transmitters, receivers, transceivers, IGBT/ Power MOSFET gate drivers, and optocoupler isolation products for wind turbine, wind farm, and solar electric power generation applications. |
| |
|
| Fiber Optics in Solar Energy Applications |
|
In a solar farm power generation system, large amounts
of current are generated from the heat of the sun. In order
to protect the equipment from huge current leakage,
galvanic insulation becomes important to ensure the
power system’s quality and reliability.
|
| Digital Selection Guide |
|
| Digital Selection Guides are interactive, searchable, and hyperlinked editions of Avago's product catalogs. |
|
| |
|
|
|
|
The ACPL-C79X evaluation board demonstrates the high gain accuracy, excellent linearity and low-offset capability of the ACPL-C79B/C79A/C790 over a wide range of input current conditions and allows a designer to easily test the performance, especially for applications in motor control and renewable energy power converter. The board may also be used for general voltage isolation without any shunt resistor. Click 
Click here to follow Avago Online and stay up to date with everything we're doing! We'll keep you in the loop
with our latest newsletters, photos, videos, product updates, and other 
